Cygnus Technology, Inc.
LSIU-02 Isolated Constant Voltage/Current Stimulator with Analog Amplifier
LSIU-02 Isolated Constant Voltage/Current Stimulator with Analog Amplifier
SKU:LSIU-02
LSIU-02 Isolator
The LSIU-02 is an precision isolated constant voltage/current type stimulator combined with an analog isolation amplifier front end. The power to this unit can be supplied by an external power pack or by an internal rechargeable battery. In voltage mode the LSIU-91 serves as an isolated gain X50 amplifier with up to +/- 100 Volt output range. In constant current mode the LSIU-01 accepts an arbitrary analog signal of +/- 2 volts and converts it into a current of +/- 2mA with +/-100 volts of compliance with a bandwidth of 10KHz. The LSIU-01 utilizes a Cygnus manufactured ultra high isolation DC-to-DC convertor which eliminates the need for expensive battery replacement.
Front Panel Information:
-
Power Switch
This switch enables the output stage power. The internal battery charging circuit is still functional as long as the power pack is plugged in. -
Voltage or Current Switch
This switch selects voltage or voltage to current mode. -
Overload Indicaror
The red LED will light any time the output exceeds 90% of maximum. -
Output Banana Terminal
The RED banana terminal is output positive and the BLACK banana terminal is negative. The GREEN banana terminal is the connected to the case but is otherwise floating.
Rear Panel Information:
-
Power Pack Input
+14 to +18 volts DC power should be connected here. Center pin should be positive. -
Input
This input accepts between an analog voltage signal up to +/- 2 volts.
Operating Procedures
- The LSIU-02 is very simple to use. Plug the power pack of the LSIU-01 into an AC outlet. Apply a voltage signal to the rear BNC. Turn on the LSIU-01 power switch. Select Voltage or Current mode and the LSIU-01 will either isolate and amplify the input signal or convert the input waveform to a curent signal.
- CAUTION!!!! The voltage between the red and black banana terminal can exceed 100v. Take care when monitoring the outputs with other instruments. Without a resistor load (example 10k ohm) between red and black terminal, damage to other equipment may occur.
受取状況を読み込めませんでした
お問合せ
お問合せ
If you have any questions or need further assistance, please don't hesitate to contact our customer service team. We're always happy to help!
配送ポリシー
配送ポリシー
ORDER CONFIRMATION & INVOICE
A second order confirmation email will be sent to you with the current lead time for your order. Invoices will be sent out once your order is ready to be shipped.
If you would like to receive the invoice earlier, please email us at sales@protechinternational.com.
Please check your Spam Folder if you do not see the emails in your inbox.
SHIPPING POLICY
Shipment processing time:
Please allow a 4-6 week processing time while we get your order in from the manufacturers. We will ship your order out as soon as we receive it. Orders are not shipped or delivered on weekends or holidays.
***Estimated shipping times does NOT include order processing times***
Shipment confirmation & Order tracking:
You will receive a Shipment Confirmation email once your order has shipped containing your tracking number. The tracking number will be active within 24 hours.
よくある質問
よくある質問
共有
