Installation
Step 1
Place Micro Guide on the prepared area of skull.
Mark and drill the three holes - One for the Guide and two for the Micro Guide tabs.
Step 2
Add a drop of Loctite to the threaded part of the Guide Cannula,
Step 3
Screw the Guide with Dummy Cannula into the Micro-Guide and adjust to the desired depth below the pedestal. Let set for 30 minutes so the Loctite can dry.
Step 4
Deposit dental cement (glue) to the bottom of the Micro Guide and place assembly on the skull, Screw the tab set screws into the skull and let dry for thirty minutes.
NOT FOR HUMAN USE.